SJ/T 960-2000 电子束管侧引出线取向图示法
作者:标准资料网 时间:2024-05-16 17:45:46 浏览:9358
来源:标准资料网
基本信息
标准名称: | 电子束管侧引出线取向图示法 |
英文名称: | Graphic representation for arrangement of side output of electron beam tubes |
中标分类: |
电子元器件与信息技术 >>
电真空器件 >>
电子束管 |
ICS分类: |
电子学 >>
电子管
|
替代情况: | SJ 960-1975 |
发布部门: | 中华人民共和国信息产业部 |
发布日期: | 2000-12-28 |
实施日期: | 2001-03-01 |
首发日期: | 1900-01-01 |
作废日期: | 1900-01-01 |
提出单位: | 中华人民共和国信息产业部 |
归口单位: | 中华人民共和国信息产业部 |
起草单位: | 中国电子技术标准化研究所 |
起草人: | 马田庆 |
出版社: | 电子工业出版社 |
出版日期: | 2001-02-01 |
页数: | 4页 |
适用范围
本规范规定了静电偏转类电子束管侧引出线的相对位置和取向图的表示方法。
本规范适用于有侧引出线的电子束管。
前言
没有内容
目录
没有内容
引用标准
GB/T 2987-1996 电子管参数符号
GB/T 4597-1996 电子管词汇
所属分类: 电子元器件与信息技术 电真空器件 电子束管 电子学 电子管
基本信息
标准名称: | 建筑门窗五金件 滑轮 |
英文名称: | Building hardware for windows and doors—Rollers |
中标分类: |
|
ICS分类: |
建筑材料和建筑物 >>
建筑构件 >>
门窗
|
替代情况: | 替代JG/T 129-2000 |
发布部门: | 中华人民共和国建设部 |
发布日期: | 2007-04-03 |
实施日期: | 2007-10-01 |
首发日期: | |
作废日期: | |
提出单位: | 建设部标准定额所 |
归口单位: | 建设部建筑制品与构配件产品标准化技术委员会 |
起草单位: | 中国建筑金属结构协会建筑门窗配套件委员会、山东国强五金制品集团有限公司 |
起草人: | 刘旭琼、安华、张喜臣、杨钟鹤、杜万明、杨慧玉等 |
出版社: | 中国标准出版社 |
出版日期: | 2007-10-01 |
页数: | 8页 |
适用范围
本标准规定了建筑门窗用滑轮的分类和标记、要求、试验方法、检验规则等。
本标准适用于建筑推拉门窗用滑轮。
前言
没有内容
目录
没有内容
引用标准
下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T2828.1 计数抽样检验程序 第1部分:按接收质量限(AQL)检索的逐批检验抽样计划
GB/T14436 工业产品保证文件
JG/T212 建筑门窗五金件 通用要求
所属分类: 建筑材料和建筑物 建筑构件 门窗
Product Code:SAE AIR737
Title:Aerospace Hydraulic and Pneumatic Specifications, Standards, Recommended Practices, and Information Reports
Issuing Committee:A-6c5 Components Committee
Scope: This SAE Aerospace Informantion Report (AIR) lists military and industry specifications, standards, recommended practices and information reports used in the design of aerospace hydraulic and pneumatic components and systems. It is intended as a supplement to specifications ARP4752, MIL-H-5440, and MIL-P-5518. Only those hardware standards specifically applicable to hydraulic or pneumatic components or systems are listed in this document. The purpose of this document is to provide a single document that lists active aerospace hydraulic and pneumatic specifications, standards, recommended practices and information reports.
Rationale: This SAE Aerospace Informantion Report (AIR) lists military and industry specifications, standards, recommended practices and information reports used in the design of aerospace hydraulic and pneumatic components and systems. It is intended as a supplement to specifications ARP4752, MIL-H-5440, and MIL-P-5518. Only those hardware standards specifically applicable to hydraulic or pneumatic components or systems are listed in this document. The purpose of this document is to provide a single document that lists active aerospace hydraulic and pneumatic specifications, standards, recommended practices and information reports.